Labeling Machine Glue Pump |
| Phoenix Manufacturing, Inc. is a distributor for a revolutionary new Cold Glue Pump that is a self-priming, air-operated, piston closing pump. The pneumatic piston transfers the force via piston rods to the liquid piston inside the suction pipe. The process is controlled via a reversing valve within the pneumatic part. The glue is pumped in both the up and down stroke. 
|
Warranty: All pneumatic glue pumps supplied by Phoenix Manufacturing, Inc. carry a 24-month replacement guarantee. Should the pump fail through normal use as directed, Phoenix will replace the pump at no charge. No spare parts inventory is required. Extended warranties that extended past the 24-month factory warranty are available upon request. Operating Principal: The Glue Pump is a self-priming, air operated piston closing pump. The pneumatic piston transfers the force via piston rods to the liquid piston inside the suction pipe. The process is controlled via a reversing valve within the pneumatic part. |
General Data: | | Drive - | Pneumatic | | Drive Principal - | Self-priming, volumetric | | Driving Piston - | 90mm | | Liquid Piston - | 46mm | | Transmission Ratio - | 3.8:1 | | Piston Stroke - | 43mm | | Pump Capacity (Water) - | 73 cm per double stroke (81/mm / 4801/h) | | Speed - | 120 stroke/min max, adjustable via outlet throttle | | Viscosity of Delivery Medium - | Up to approx. 100,000 mPas | | Pulsation - | Low | | Suction side - Connection type - | Suction Pipe (standard length 420mm) | | Pressure Side Connection type - | Hose Socket 19mm - 3/4 female thread | | Suction Height - | Self-priming approx. 5m of water column | | Overall length - | 670 mm (other lengths available on request) | | Weight - | 4.5 kg - 9.9 lbs. | | Pneumatic Data: | | Compressed Air Connection type - | 1/4" female thread | | Operating Pressure - | 3-6 bar filtered compressed air (40-90 P.S.I.) | | Compressed Air Consumption - | 2401/ min max. at continuous operation | | Integrated Pneumatic Valves - | Main valve 5/2 directional valve |
Electrical Data
(For pumps with heaters) |
| Electrical Connection - | 230V /50/60/Hz |
| Electrical Cable - | 2 meter 3"x1.5" rubber Cable |
| Pneumatically Operated - | 40 P.S.I. |
| Programmable Heating Temp (4 levels) - | 1400 Watt level 1 = 100% heating output |
| | 700 Watt level 2 = 50% heating output |
| | 350 Watt level 3 = 25% heating output |
| | 175 Watt level 4 = 12.5% heating output |
| Temperature Controller - | Electronic two-step control |
| Temperature Setting - | Via Display and keyboard membrane |
| Temperature Range - | Programmable between 7º and 90ºCelsius |
| Stainless Steel Temperature Sensor - | Electronic |
| |
Material Data |
| Drive Housing - | POM - polyacetal |
| Liquid Housing - | POM - polyacetal |
| Suction Pipe - | Stainless steel (304) |
| Liquefied Seal - | PTFE seal ring (Teflon) |
| External Piston Rods - | Stainless Steel (304), polished |
| Electrical Housing - | PE - polyacetal |
| Liquid Valve Seat - | Viton O-Ring |
